MUTOH VC-600 User Manual page 42

Control Panel
9600, o, 7, 1, p
9600, e, 7, 1, p
9600, n, 8, 1, p
9600, o, 8, 1, p
9600, e, 8, 1, p
19200, n, 7, 1, p 19200pbs, 7 Bits with NO Parity
19200, o, 7, 1, p 19200pbs, 7 Bits with ODD Parity
19200, e, 7, 1, p 19200pbs, 7 Bits with EVEN Parity
19200, n, 8, 1, p 19200pbs, 8 Bits with NO Parity
19200, o, 8, 1, p 19200pbs, 8 Bits with ODD Parity
19200, e, 8, 1, p 19200pbs, 8 Bits with EVEN Parity
Firmware To display the version number of Firmware and FPGA code.
Version
Select To select displayed languages on LCM panel in English,
Language Spanish, Italian, Deutsch, Japanese, Portuguese, Polish,
Turkish or French.
Select Units Provide two-unit systems for users convenient.
Image Scale To adjust the scale of media length and width that may cause
Length by the thickness of the media.
The Denominator is the actual length, and the Numerator is
the ideal length measured from the resultant.
For example, cutting a line with 500.0 mm length. The
procedure as follows:
Image Scale
1. Press the [LEFT ARROW] to choose the Numerator and
Width
2. Cut the length by sending a graph file,
3. Measure the length then use the [RIGHT ARROW] key to
4. Press [UP ARROW /DOWN ARROW] to change the values
9600pbs, 7 Bits with ODD Parity
9600pbs, 7 Bits with EVEN Parity
9600pbs, 8 Bits with NO Parity
9600pbs, 8 Bits with ODD Parity
9600pbs, 8 Bits with EVEN Parity
select 500.0 mm,
choose the Denominator, then
of the actual length.
42
ValueCut USER MANUAL
English
Metric(cm/g) Metric
Unit(inch/g)
Unit(cm/oz)
English(inch/oz)
250mm/250mm 250mm/25
500mm/500mm 0mm
750mm/750mm
V5a 2015 Jan