Start Up Of The Flexistarter - MUTOH VC-600 User Manual

ValueCut USER MANUAL
First of all, after the Install Manager screen appears, put a 3:password in the attached password sheet
into "Password". Then, USER ID may show up in a:"User Number". Select "FlexiSTARTER ValueCut
Edition" in 4:"Product" and "English" in 5:"Language" and click on
Finally, the installation is done.
3
4

8.3 Start up of the FlexiSTARTER

After the installation of the FlexiSTARTER ValueCut Edition, two software
are installed; the FlexiSTARTER that makes it possible to create and edit
cutting date and the Production Manager that allows you to manage cutting
job from the FlexiSTARTER ValueCut and control device of the ValueCut.
Each icon may be present on the desktop.
Note: At this point, put the attached the USB Hrdware Key
into the computer. Then, connect the ValueCut to the
computer by a USB connection cable and turn on the
ValueCut.
Double-click on the FlexiSTARTER ValueCut Edition icon to start.
Also, double-click on the Production Manager icon to start.
V5a 2015 Jan
a
5
71
FlexiSTARTER Quick Start Guide
.