Setting The P4 Key To Screen Capture - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
7-4-1 Check and Record the P4 Key Function
5.) In the Destinations section, record the service that is displayed. The destinations list displays
NOTE: From BTO5 software, Check and Record the P4 Key Function
In the Physical Print Buttons section, record the service that is displayed. The Physical Print Buttons
section displays the following information :
6.) In the Image generated section, record the parameters related to the service.
NOTE: From BTO5 software,In the Physical Print Buttons section, record the parameters related to the
service.
7-4-2

Setting the P4 Key to Screen Capture

If the P4 Key is not set to screen capture:
1.) Go to Utility->Connectivity->Button.
2.) Select Print4 under Physical Print Buttons section and set the Image Frames to Secondary
3.) Ensure that the Image Frames is set to Secondary Capture, Capture Area to Whole Screen,
4.) The P4 Key should now be set up for whole screen capture, sending the screens to the image
7 - 6
7
the following information:
* Name: user defined during service configuration
* Type: the type of service
* Server: the device for which the service was configured
* Dir: direction: output, input, or both (I+O)
* Format : the type of image format
* Image Frames : Single, Multiple, Secondary Capture
* Capture Area : Video Area, Image Area, Whole Screen
* Compression : The type of image compression.
* Quality % : Image Quality.
In the Physical Print Buttons section, record the parameters related to the service.
Capture. Add "Copy to Dataflow" to printflow view.
and Compression to None.
buffer (clipboard).
Section 7-4 - Screen Captures
LOGIQ™ 5 PRO S
(cont'd)
M
ERVICE ANUAL