Setting The P2 Key To Screen Capture - GE Vivid T8 Basic Service Manual

Setting the P2 Key to Screen Capture

Vivid T8/ Vivid T8 Pro – Basic Service Manual
5490863-100 English Rev. 03
If the P2 Key is not set to screen capture:
1. While on the Connectivity screen, with the Buttons tab
displayed, go to the Destinations list.
2. From the list select Store to clipboard. Press [>>] to add
the selection to the Selected devices section.
3. Ensure that the Button section for Image frames is set to
Whole Screen, secondary Capture and No Image
Compression.
4. The P2 Key should now be set up for whole screen capture,
sending the screens to the image buffer (clipboard).
Screen Capture
7-7