Op Bottom Cover (Fru No. 310) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-5-11

OP Bottom Cover (FRU No. 310)

Purpose: This is a description on how to remove and replace the OP Bottom Cover.
8-5-11-1 Tools
• Common pillips screwdrivers
• Allen/Unbraco wrench
8-5-11-2 Needed Manpower
• 1 persons, 25 minutes + travel
8-5-11-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-2-2 on
page 5.
8-5-11-4 Removal Procedure
1.) Remove the Left Cover (FRU No.300). Refer to section 8-5-1 on page 41.
2.) Remove the Right Cover (FRU No.301). Refer to section 8-5-2 on page 43.
3.) Remove the Front Base Cover (FRU No.305). Refer to 1.) on page 8-40.
4.) Remove the Front Cover (FRU No.306). Refer to section 8-5-7 on page 53.
5.) Remove the OP Side L Cover (FRU No.307). Refer to section 8-5-8 on page 54.
6.) Remove the OP Side R Cover (FRU No.308). Refer to section 8-5-9 on page 56.
7.) Unscrew four (4) screws (1-4). Refer to Figure 8-58.
8 - 60
7
Figure 8-58 Removing the OP Bottom Cover
Section 8-5 - Covers
LOGIQ™ 5 PRO S
3
4
1
2
M
ERVICE ANUAL