Jpc Assy (Fru No. 702) - GE LOGIQ 5 PRO Service Manual

GE M S
EDICAL YSTEMS
D 2380207, R
IRECTION EVISION
8-9-3

JPC Assy (FRU No. 702)

Purpose: This is a description on how to remove and replace the JPC Assy.
8-9-3-1 Tools
• Common pillips screwdrivers
• Allen/Unbraco wrench
8-9-3-2 Needed Manpower
• 1 person, 15 minutes + travel
8-9-3-3 Preparations
• Shut Down the System and switch off the Main Breaker at the rear as described in section 4-3-2 on
page 4.
8-9-3-4 Removal Procedure
Do not wear the ESD wrist strap when you remove a part of power supply unit. Turn OFF power
CAUTION
and unplug the power cord before removing a part of power supply unit. However be sure to turn
off power and wear the strap before you remove a circuit boards.
1.) Unscrew nine (9) hexagon screws (1-9) to remove the AC Power Top cover.
2.) Unscrew five (5) screws (10-14).
JPC Assy
8 - 158
7
Figure 8-176 JPC Assy
Section 8-9 - Power Block
LOGIQ™ 5 PRO S
ERVICE
M
ANUAL