Display Line - Danfoss VLT HVACDrive Instruction Manual

VLT ® HVAC Drive Instruction Manual
[2157] Ext. 3 Reference [Unit]
[2158] Ext. 3 Feedback [Unit]
[2159] Ext. 3 Output [%]
[2230] No-Flow Power
[2316] Maintenance Text
[2580] Cascade Status
[2581] Pump Status
[3110] Bypass Status Word
[3111] Bypass Running Hours
[9913]
[9914]
[9920] HS Temp. (PC1)
[9921] HS Temp. (PC2)
[9922] HS Temp. (PC3)
[9923] HS Temp. (PC4)
[9924] HS Temp. (PC5)
[9925] HS Temp. (PC6)
[9926] HS Temp. (PC7)
[9927] HS Temp. (PC8)
NOTE!
Please consult the VLT HVAC Drive
0-21 Display Line 1.2 Small
Select a variable for display in line 1, middle position.
Option:
[1614] * Motor Current
The options are the same as those listed in par. 0-20
0-22 Display Line 1.3 Small
Option:
0-23 Display Line 2 Large
Option:
The value of the reference for extended Closed-loop Controller 3
The value of the feedback signal for extended Closed-loop Controller 3
The value of the output from extended Closed-loop Controller 3
The calculated No-Flow Power for the actual operating speed
Status for the operation of the cascade controller
Status for the operation of each individual pump controlled by the cascade controller
Programming Guide, MG.11.CX.YY
Function:
Display Line 1.1 Small .
Function:
Select a variable for display in line 1, right position.
The options are the same as those listed under 0-2*.
Function:
Select a variable for display in line 2.
The options are the same as those listed under 0-2*.
MG.11.AB.22 - VLT ® is a registered Danfoss trademark
7 How to Program the Adjustable Frequency
for detailed information.
Drive
7
7-11