7 How to Program the Adjustable Frequency
Drive
3-19 Jog Speed [RPM]
Range:
Application
[Application dependant]
dependent*
3-41 Ramp 1 Ramp-up Time
Range:
Application
[Application dependant]
dependent*
3-42 Ramp 1 Ramp-down Time
Range:
Application
[Application dependant]
dependent*
4-10 Motor Speed Direction
Option:
7
[0]
Clockwise
[2] *
Both directions
NOTE!
The setting in par. 4-10
4-11 Motor Speed Low Limit [RPM]
Range:
Application
[Application dependant]
dependent*
4-12 Motor Speed Low Limit [Hz]
Range:
Application
[Application dependant]
dependent*
4-13 Motor Speed High Limit [RPM]
Range:
Application
[Application dependant]
dependent*
NOTE!
Max. output frequency cannot exceed 10% of the inverter switching frequency (par. 14-01
7-22
Function:
Function:
Function:
Function:
Selects the motor speed direction required.
Use this parameter to prevent unwanted reversing.
Only operation in a clockwise direction will be allowed.
Operation in both a clockwise and anti-clockwise direction will be allowed.
Motor Speed Direction
has impact on the Flying Start in par. 1-73
Function:
Function:
Function:
MG.11.AB.22 - VLT
VLT
®
Flying Start
Switching Frequency
®
is a registered Danfoss trademark
HVAC Drive Instruction Manual
.
).