Auto On; Reset - Danfoss VLT HVACDrive Instruction Manual

VLT ® HVAC Drive Instruction Manual

[Auto on]

enables the adjustable frequency drive to be controlled via the control terminals and/or serial communication. When a start signal is applied on the control
terminals and/or the bus, the adjustable frequency drive will start. The key can be
NOTE!
An active HAND-OFF-AUTO signal via the digital inputs has higher priority than the control keys [Hand on] [Auto on].

[Reset]

is used for resetting the adjustable frequency drive after an alarm (trip). The key can be
Enabled
MG.11.AB.22 - VLT ® is a registered Danfoss trademark
6 How to Operate the Adjustable Frequency
Disabled [Auto on] Key on LCP
[1] or [0] via par. 0-42
Enabled [1] or Disabled [0] via par. 0-43
Drive
.
[Reset] Key on LCP .
6
6-9