Display Text; 0-70 Date And Time - Danfoss VLT HVACDrive Instruction Manual

7 How to Program the Adjustable Frequency
Drive
0-24 Display Line 3 Large
Select a variable for display in line 3.
Option:
[1502] * kWh Counter
The options are the same as listed for par. 0-20

0-37 Display Text 1

Range:
0 N/A* [0 - 0 N/A]
0-38 Display Text 2
7
Range:
0 N/A* [0 - 0 N/A]
0-39 Display Text 3
Range:
0 N/A* [0 - 0 N/A]

0-70 Date and Time

Range:
Application [Application dependant]
dependent*
7-12
Function:
Display Line 1.1 Small .
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If it is to be displayed permanently, select Display Text 1 in
Display Line 1.1 Small
par. 0-20
Small , par. 0-23 Display Line 2 Large
the LCP to change a character. Use the
highlighted by the cursor, it can be changed. Use the
character. A character can be inserted by placing the cursor between two characters and pressing
▲ ▼
or .
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If to be displayed permanently select Display Text 2 in par. 0-20
Line 1.1 Small Display Line 1.2 Small
, par. 0-21
Line 2 Large or par. 0-24 Display Line 3 Large
◀ ▶
character. Use the and buttons to move the cursor. When a character is highlighted by the
cursor, this character can be changed. A character can be inserted by placing the cursor between
▲
two characters and pressing or
Function:
In this parameter, it is possible to write an individual text string for display in the LCP or to be read
via serial communication. If it is to be displayed permanently, select Display Text 3 in
Display Line 1.1 Small
par. 0-20 ,par. 0-21
par. 0-23 Display Line 2 Large or par. 0-24
LCP to change a character. Use the
highlighted by the cursor, this character can be changed. A character can be inserted by placing the
cursor between two characters and pressing
Function:
MG.11.AB.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Instruction Manual
Display Line 1.2 Small
, par. 0-21 , par. 0-22
or par. 0-24 Display Line 3 Large . Use the
◀ ▶
and buttons to move the cursor. When a character is
▲ ▼
or buttons on the LCP to change a
Display Line 1.3 Small
, par. 0-22
▲ ▼
. Use the or buttons on the LCP to change a
▼
.
Display Line 1.2 Small
, par. 0-22
Display Line 3 Large . Use the
◀ ▶
and buttons to move the cursor. When a character is
▲ ▼
or .
Display Line 1.3
▲ ▼
or buttons on
Display
Display
, par. 0-23
Display Line 1.3 Small
,
▲ ▼
or buttons on the