Changing Data; Changing A Text Value; Changing A Group Of Numeric Data Values - Danfoss VLT HVACDrive Instruction Manual

VLT ® HVAC Drive Instruction Manual

7.1.3 Changing Data

1. Press the [Quick Menu] or [Main Menu] key.
▲ ▼
2.
Use [ ] and [ ] keys to find parameter group to edit.
3. Press the [OK] key.
▲ ▼
4.
Use [ ] and [ ] keys to find parameter to edit.
5. Press the [OK] key.
▲ ▼
6.
Use the [ ] and [ ] keys to select the correct parameter setting. Or, to move to digits within a number, use the keys. The cursor indicates the
digit selected to be changed. The [
7. Press the [Cancel] key to disregard the change, or press the [OK] key to accept the change and enter the new setting.

7.1.4 Changing a Text Value

If the selected parameter is a text value, it can be changed by using the
up/down navigation keys.
The up key increases the value, and the down key decreases the value.
Place the cursor on the value to be saved and press [OK].

7.1.5 Changing a Group of Numeric Data Values

If the chosen parameter represents a numeric data value, change the
chosen data value by means of the [◄] and [►] navigation keys as well
▲ ▼
] navigation keys. Use the ◄] and [►] navigation
as the up/down [ ] [
keys to move the cursor horizontally.
▲ ▼
] key increases the value, the [ ] key decreases the value.
MG.11.AB.22 - VLT ® is a registered Danfoss trademark
7 How to Program the Adjustable Frequency
Figure 7.9: Display example.
Figure 7.10: Display example.
Drive
7
7-5