Parameter Group 0-** Operation / Display - Danfoss VLT HVAC Drive FC 131 Programming Manual

VLT® HVAC Drive FC 131
Programming Guide
Table 12: Parameter List
24-10 Drive Bypass Function
24-11 Drive Bypass Delay
Time
30-** Special Features

4.2 Parameter Group 0-** Operation / Display

Parameters related to the fundamental functions of the drive, function of the LCP keys and configuration of the LCP display.
4.2.1 0-0* Basic Settings
Parameter group for basic drive settings.
0-01 Language
Default value: [0] English
Conversion index: -
Select the language to be used in the display.
It is recommended to select [0] English for regions except China.
Table 13: Option:
[0]
[1]
[2]
[3]
[4]
[5]
[10]
[28]
[255]
0-03 Regional Settings
Default value: [0] International
Conversion index: -
To meet the needs for different default settings in different parts of the world, parameter 0-03 Regional Settings is implemented in
the drive. The selected setting influences the default setting of the motor nominal frequency.
Table 14: Option:
[0] International
[1] North America
34 | Danfoss A/S © 2022.05
30-2* Adv. Start Adjust
30-22 Locked Rotor Protec-
tion
Parameter type: Option
Data type: u_int8
N O T I C E
English
Deutsch
Francais
Dansk
Espanol
Italiano
Chinese
Portuguese
Numeric prg.
Parameter type: Option
Data type: u_int8
Set the default value of parameter 1-23 Motor Frequency to 50 Hz.
Set the default value of parameter 1-23 Motor Frequency to 60 Hz.
30-23 Locked Rotor Detection
Time [s]
30-5* Unit Configuration
2-setup: 1 setup
Change during operation: True
2-setup: 1 setup
Change during operation: False
Parameters
30-58 LockPassword
39-** Customer Specific Set-
ting
AU370727746889en-000101 / 130R0994