Access To Control Terminals - Danfoss VLT HVACDrive Instruction Manual

4 Electrical Installation

4.1.25 Access to Control Terminals

All terminals to the control cables are located underneath the terminal cover
on the front of the adjustable frequency drive. Remove the terminal cover
with a screwdriver.
4
Remove front cover to access control terminals. When replacing the front
cover, ensure proper fastening by applying a torque of 2 Nm.
4-28
130BT248
Figure 4.39: Access to control terminals for A2, A3, B3, B4, C3 and
C4 enclosures
Figure 4.40: Access to control terminals for A5, B1, B2, C1 and C2
enclosures
MG.11.AB.22 - VLT ® is a registered Danfoss trademark
VLT ® HVAC Drive Instruction Manual