VLT
®
HVAC Drive Instruction Manual
22-88 Pressure at Rated Speed
Range:
999999.999
[Application dependant]
N/A*
Please see also
par. 22-82 Work Point Calculation
22-89 Flow at Design Point
Range:
0.000 N/A*
[0.000 - 999999.999 N/A]
par. 22-82 Work Point Calculation
Please see also
22-90 Flow at Rated Speed
Range:
0.000 N/A*
[0.000 - 999999.999 N/A]
Function:
Enter the value corresponding to the Pressure at Rated Speed, in Reference/Feedback Units. This
value can be defined using the pump datasheet.
point A.
Function:
Enter the value corresponding to the Flow at Design Point. No units necessary.
point C.
Function:
Enter the value corresponding to Flow at Rated Speed. This value can be defined using the pump
datasheet.
MG.11.AB.22 - VLT
®
is a registered Danfoss trademark
7 How to Program the Adjustable Frequency
Drive
7
7-49