Error Messages - Ricoh G176 Service Manual

Error Messages

4.2 ERROR MESSAGES
Here is a list of common error messages, a description of the problems, and their solutions.
This is just a reference information.
1st/2nd Message
Cannot check, Signal in Ad hoc
Cannot duplex Tray #/ Press
Form Feed or reset the Job
Cannot install from this SD card
Certificate auto renewal failed
Change Setting
Tray #/Paper Size:, Paper Type:
Change Setting
Tray #/ Paper Size:, Paper Type:
G176/G177/G176L
Problem/Solution
Disable Ad hoc in the Comm. Mode settings.
Duplexing prohibited from specified tray.
Cancel duplex mode
Press [Form Feed] or [Job Reset].
SD card contains a DOS (Data Overwrite Security)
program that has already been installed for another
machine.
Contact system administrator.
Automatic certificate renewal has failed.
Call your service provider.
The paper size/paper type settings in the application
program and printer driver do not match.
Change the paper type on the paper type setting
menu on the machine operation panel
Push [Form Feed]
Cancel the print job.
The paper size/paper type settings in the application
program and printer driver do not match.
Do one of the following:
Load the tray with the correct paper
Change the paper size using the dial or the
special paper size setting menu on the operation
panel.
Push [Form Feed]
Cancel the print job.
4-18 SM