Ricoh G176 Service Manual page 127

RCG-C Registed
This SP displays the embedded RCG installation end flag.
5816 021
0: Installation not completed
1: Installation completed
RCG-C Regist Det
This SP displays the external RCG installation status.
5816 022
0: External RCG not registered
1: External RCG registered
2: Device registered
Type (N/M)
This SP displays and selects the embedded RCG connection method.
5816 023
[0 or 1 / 0 / 1 /step
0: Internet connection
1: Dial-up connection
Cert Expire Tim(ing)
5816 061
DFU
5816 062 Use HTTP Proxy
HTTP Proxy (Host)
This SP sets the address of the proxy server used for communication
between embedded RCG-N and the gateway. Use this SP to set up or
display the customer proxy server address. The address is necessary to set
5816 063
up embedded RCG-N.
Note: The address display is limited to 128 characters. Characters beyond
the 128 character are ignored.
This address is customer information and is not printed in the SMC report.
SM
Printer Engine Service Mode
Proximity of the expiration of the certification.
This SP setting determines if the proxy server is
used when the machine communicates with the
service center.
[0 or 1 / 0 / 1 /step]
0: HTTP Proxy not used
1: HTTP Proxy used
5-25 G176/G177/G176L