Ricoh G176 Service Manual page 135

Remote Service A(ddress)
5821
5821 1 CSS-PI Device Co(de)
5821 2 RCG IP Address
Paper Supply for DFU
An @Remote setting. Not required for service technician.
1: Bypass
5823
2: Tray 1
3: Tray 2
4: Tray 3
5: Tray 4
NVRAMUpload
Uploads the UP and SP mode data (except for counters and the serial
5824
number) from NVRAM on the control board to a flash memory card.
While using this SP mode, always keep the front cover open. This prevents
a software module accessing the NVRAM during the upload.
NVRAMDownload
5825
Downloads the content of a flash memory card to the NVRAM on the control
board.
SM
Printer Engine Service Mode
Sets the PI device code. After changing this
setting, you must switch the machine off and
on.
Sets the IP address of the RCG (Remote
Communication Gate) destination for call
processing at the remote service center.
[00000000h to FFFFFFFFh/00000000h/
5-33 G176/G177/G176L