Controller Functions - Ricoh G176 Service Manual

6.6 CONTROLLER FUNCTIONS

Meter-charge Counter Display
When meter charge mode is switched on with SP5930-001, the meter-charge counter
menu is the first item shown on the user menu:
Menu:
Counter
(The "Sample Print" menu appears first when the meter-charge mode is switched off.)
PM Warning Display
When meter charge mode is switched on with SP5930, "Replace Maintenance Kit" will not
be displayed at 90k prints. The default setting for this machine is meter-charge mode off.
Item
Meter-charge Shown as the first
counter item in the user menu
PM Warning Not shown
PM Service
PM Counter Reset manually
The meter-charge counter is not the same as the PM counter because the meter-charge
counter does not count up in the following cases:
Blank rear side during duplex printing
Blank page when using the "Cover Page" or "Two in One" features
Service reports
The meter-charge counter cannot be reset.
SM
Meter-charge On Meter-charge Off
Not shown
"Replace
Maintenance Kit"
displayed at 90k prints
Customer
Automatically reset
when the fusing unit is
replaced using the
maintenance kit
6-33
Controller Functions
Remarks
User menu
Printer engine
service mode "PM
counter"
G176/G177/G176L