Ricoh G176 Service Manual page 138

Printer Engine Service Mode
5828 091 Web
5828 145 ActIPv6LinkLocal
5828 147 ActIPv6Sttles1
5828 149 ActIPv6Sttles2
5828 151 ActIPv6Sttles3
5828 153 ActIPv6Sttles4
5828 155 ActIPv6Sttles5
IPv6Manual
5828 156
Address
5828 158 IPv6 Gateway
IPv6 Statelss
5828 161
Auto
G176/G177/G176L
Disables or enables the Web operation.
[0~1/1]
0: Disable
1: Enable
This is the IPv6 local address referenced on the Ethernet
or wireless LAN (802.11b) in the format:
"Link-Local address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in
8 blocks of 16 bits each. These notations can be
abbreviated. See "Note: IPV6 Addresses " below this
table.
These SPs are the IPv6 stateless addresses (1 to 5)
referenced on the Ethernet or wireless LAN (802.11b) in
the format:
"Stateless Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in
8 blocks of 16 bits each.
This SP is the IPv6 manually set address referenced on
the Ethernet or wireless LAN (802.11b) in the format:
"Manual Set Address" + "Prefix Length"
The IPv6 address consists of a total 128 bits configured in
8 blocks of 16 bits each. These notations can be
abbreviated. See "Note: IPV6 Addresses" below this table.
This SP is the IPv6 gateway address referenced on the
Ethernet or wireless LAN (802.11b). The IPv6 address
consists of a total 128 bits configured in 8 blocks of 16 bits
each. These notations can be abbreviated. See "Note:
IPV6 Addresses " below this table.
Enables or disables the IPv6 Stateless Auto setting on the
Ethernet or wireless LAN (802.11b).
0: Off, 1: On
5-36 SM