Ricoh G176 Service Manual page 143

Init All Set&Dir
The SP clears all the setting information managed in UCS and address
book information (local, delivery, LDAP) and restores these settings to their
default values. Use this SP to initial the account information (user codes
and passwords) for system managers and users as well.
Note:
Be sure to cycle the machine off and on after you execute this SP code.
Once this SP has been executed, a message on the screens of
5846 046
applications that use the address book will prompt users that the
address book is being updated. This prevents the machine from issuing
SC870.
The machine initializes to determine if the address book is stored on the
HDD or on an SD card. In order for the machine to determine whether
to recognize an address book on the HDD or the SD card, the machine
must be cycled off and on once more to determine whether the machine
should recognize the address book on the HDD or the SD card.
Init Local Add B
5846 047
Clears all of the address information from the local address book of a
machine managed with UCS.
Init All Dir
Clears everything (including users codes) in the directory information
5846 050
managed by UCS. However, the accounts and passwords of the system
administrators are not deleted.
SM
Initialize Address Book Settings & Directories
5-41
Printer Engine Service Mode
G176/G177/G176L