Ricoh G176 Service Manual page 171

7932 006 Pre VarietyID
7932 007 RFConductTime
SM
This is the same type of information read with
SP7931 005 from the AIO ID Chip for the cartridge
presently installed in the machine, but this SP
displays the value read from 4CH of the EEPROM
for the previously installed cartridge.
1: 3K
2: 6K
3: 15K
4: 20K
This SP saves the rotation count (sec.) for the OPC
when a re-filled cartridge is detected. When a
re-filled cartridge is detected, the value for the OPC
rotation count is copied from the AIO ID Chip and
saved this SP.
Note:
If the cartridge is not installed, if the AIO is not
set properly, or if the front door is open, no value
will be displayed because the machine cannot
communicate with the AIO.
The counter increments by "1" for every 6 sec.
of drum rotation time.
To calculate the actual time in sec., multiply the
displayed value by 6.
5-69
Printer Engine Service Mode
G176/G177/G176L