Ricoh G176 Service Manual page 85

Rev. 10/27/2009
874 Delete All error 1: HDD
A data error was detected for the
HDD/NVRAM after the Delete All
D
option was used.
Note: The source of this error is
the Data Overwrite Security Unit
B660 running from an SD card.
Delete All error 2: Data area
An error occurred while the
machine deleted data from the
875 D
HDD.
Note: The source of this error is
the Data Overwrite Security Unit
B660 running from an SD card.
876 D Log data abnormal
An error was detected in the
handling of the log data at power
on or during machine operation.
This can be caused by switching
the machine off while it is
operating.
877 HDD Data Overwrite Security SD
card error
⇒
The 'all delete' function cannot
be executed but the Data
Overwrite Security Unit is
installed and activated.
SM
Turn the main switch off/on and try
the operation again.
Install the Data Overwrite Security
Unit again. For more, see section "1.
Installation".
HDD defective
Turn the main switch off/on and try
the operation again.
Software error. Update the firmware
NVRAM defective
HDD defective
Defective SD card.
SD card not installed
1. Replace the NVRAM and then install
the new SD card.
2. Check and reinstall the SD card.
4-15
Service Call Conditions
G176/G177/G176L