Ricoh G176 Service Manual page 80

Service Call Conditions
Self-diagnostic Error: RAM
The resident RAM returned a
827 D
verify error during the
self-diagnostic test.
Self-diagnostic error 7: ROM
Measuring the CRC for the boot
monitor and operating system
828 D
program results in an error.
A check of the CRC value for
ROMFS of the entire ROM area
results in an error.
For more details about this SC 833, SC834 error, execute SP5990 to print an SMC report
so you can read the error code. The error code is not displayed on the operation panel. The
additional error codes (0F30, 0F31, etc. are listed in the SMC report.
Self-diagnostic Error: Optional RAM
829 B
The optional RAM returned an error
during the self-diagnostic test.
IEEE 1394 I/F error
851 B
Driver setting incorrect and
cannot be used by the 1394 I/F.
Wireless LAN Error 1
During machine start-up, the machine can
853 B
get access to the board that holds the
wireless LAN, but not to the wireless LAN
card (802.11b or Bluetooth).
G176/G177/G176L
Update controller firmware again
Replace RAM DIMM
Software defective
Controller board defective
ROM defective
Replace the optional memory
board
Controller board defective
NIB (PHY), LINK module defective;
change the Interface Board
Controller board defective
Wireless LAN card missing
(was removed)
4-10
Rev. 10/27/2009
SM