Ricoh G176 Service Manual page 124

Printer Engine Service Mode
5804 013 Fuser Re
5804 019 Poly + LD1 Both
5804 020 LD2 Compulsion
5804 021 Poly + LD Both
5804 022 Polygon Motor
5804 023 Pol + LD
5804 026 No2 CL
5804 027 Bank2 Motor
5804 028 No3 CL
5804 029 Bank3 Motor
5804 041 Dplx Mt Normal
5804 042 Dplx Mt Revers(e)
5804 043 Dplx Mt Long
5804 044 Dplx Split SOL
5804 047 Charge Bias
5804 048 Developer Bias
5804 049 Transfer Plus
5804 050 Transfer minus
Fusing Err Clr
5810
Resets an SC code for a fusing unit error.
After using this SP mode, turn the main switch off and on.
G176/G177/G176L
Fusing Lamp Relay
Polygon Motor + LD 1
Force Test LD 2
Polygon Motor + LD 1 + LD 2
Polygon Motor
Polygon Motor and Laser Diode
Paper Feed Clutch-1st Opt. Paper Tray
Paper Tray Motor-1st Opt. Paper Tray
Paper Feed Clutch-2nd Opt. Paper Tray
Paper Tray Motor-2nd Opt. Paper Tray
Duplex Inverter Motor-forward
Duplex Inverter Motor-reverse
Duplex Transport Motor
Inverter Gate Solenoid
Charge Bias
Developer Bias
Transfer Plus
Transfer minus
5-22 SM