Ricoh G176 Service Manual page 136

Printer Engine Service Mode
Network
This machine supports both Internet Protocols IPv4 and IPv6. IPv6 is the next
5828
generation protocol designed by the IETF to replace IPV4. IPv6 adds many
improvements such as routing and network auto-configuration.
5828 001 IPv4 Address
IPv4 Subnet
5828 002
Mask
5828 003 IPv4 DefaultGate
5828 006 DHCP
5828 021 ActIPv4Add
5828 045 Bi Direct Centro
G176/G177/G176L
This SP allows you to confirm and reset the IPv4 address
for Ethernet and a wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.168.000.001" this is
read "0C0A80001h"
This SP allows you to confirm and reset the IPv4 subnet
mask for Ethernet and a wireless LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "255.255.255.00" this is
read "FFFFFF00h".
This SP allows you to confirm and reset the IPv4 default
gateway used by the network for Ethernet and wireless
LAN (802.11b):
aaa.bbb.ccc.ddd
For example, if the 8-bit entry is "192.169.000.001" this is
read "0C0A80001h"
This SP code allows you confirm and change the setting
that determines whether the IP address is used with
DHCP on an Ethernet or wireless (802.11b) LAN network.
[0~1/1/0]
0: Not used (manual setting)
1: Used
This SP allows you to confirm the IPv4 address that was
used when the machine started up with DHCP. For
example, if the the setting of the the IPv4 address is
"0C0A80001h " this is displayed as "192.169.000.001".
Enables and disables the Centro communication.
5-34 SM