Ricoh G176 Service Manual page 129

A rescue update for certification has been issued and a rescue
11
certification setting is in progress for the rescue GW connection.
The rescue certification setting is completed and the GW URL is being
12
notified of the certification update request.
The notification of the request for certification update has completed
13 successfully, and the system is waiting for the certification update
request from the rescue GW URL.
The notification of the certification request has been received from the
14
rescue GW controller, and the certification is being stored.
The certification has been stored, and the GW URL is being notified of
15
the successful completion of this event.
The storing of the certification has failed, and the GW URL is being
16
notified of the failure of this event.
The certification update request has been received from the GW URL,
the GW URL was notified of the results of the update after it was
17
completed, but an certification error has been received, and the
rescue certification is being recorded.
The rescue certification of No. 17 has been recorded, and the GW
18
URL is being notified of the failure of the certification update.
CERT:Error
Displays a number code that describes the reason for the request for update
of the certification.
0 Normal. There is no request for certification update in progress.
5816 068
Request for certification update in progress. The current certification
1
has expired.
An SSL error notification has been issued. Issued after the certification
2
has expired.
SM
Printer Engine Service Mode
5-27 G176/G177/G176L