Hot Roller And Fusing Lamp - Ricoh G176 Service Manual

Fusing

3.7.2 HOT ROLLER AND FUSING LAMP

Fusing Unit (See "Fusing Unit")
[A] Left cover ( x 1)
[B] Plate ( x 2)
[C] Upper fusing unit assembly (
[D] Right cover ( x 1)
[E] Lamp holders (
Remove both springs before taking apart the fusing unit assembly. The reason for
this is to relieve pressure on the unit.
When reinstalling the fusing unit assembly, install both springs last. The reason for
this is to reset the springs back to their default position.
G176/G177/G176L
x 4, Springs x2)
x 1 each)
3-16 SM