Ricoh G176 Service Manual page 137

5828 050 1284 Compatible
5828 052 ECP
5828 065 Job Spool
5828 066 HD job Clear
5828 069 JobSpool Protocl
5828 090 TELNET
SM
[0to1/1]
0:Off, 1: On
Enables and disables bi-directional communication on the
parallel connection between the machine and a computer.
[0~1/1]
0:Off
1: On
Disables and enables the ECP feature (1284 Mode) for
data transfer.
[0~1/1]
0: Disabled
1: Enabled
Switches job spooling spooling on and off.
0: No spooling 1: Spooling enabled
This SP determines whether the job interrupted at power
off is resumed at the next power on. This SP operates only
when SP5828 065 is set to 1.
1: Resumes printing spooled jog.
0: Clears spooled job.
This SP determines whether job spooling is enabled or
disabled for each protocol. This is a 8-bit setting.
0 LPR
1 FTP (Not Used)
2 IPP
3 SMB
Disables or enables Telnet operation. If this SP is
disabled, the Telnet port is closed.
[0~1/1]
0: Disable
1: Enable
5-35
Printer Engine Service Mode
4 BMLinks (Japan Only)
5 DIPRINT
6 Reserved (Not Used)
7 Reserved (Not Used)
G176/G177/G176L