Ricoh G176 Service Manual page 118

Printer Engine Service Mode
7th
8th
001
003
004
UCodeCtrClr
5404
Clears the counts for the user codes assigned by the key operator to restrict
the use of the machine. Press [#Enter] to clear.
PM Alarm
[0 to 9999/0/1 step]
5501
0: Alarm off
1 to 9999: Alarm goes off when Value (1 to 9999) ≥ PM counter
Jam Alarm
Sets the alarm to sound for the specified jam level (document misfeeds are
not included).
[0 to 3/3/1 step]
5504
0: Zero (Off)
1: Low (2.5K jams)
2: Medium (3K jams)
3: High (6K jams)
G176/G177/G176L
Example: 00:00 (Midnight) = 00, 01:00 (1 a.m.) = 01, and so on.
The number of hours to change the time. 1 hour: 1
If the time change is not a whole number (1.5 hours for example),
digit 8 should be 3 (30 minutes).
Setting
Rule Set (Start)
Rule Set (End)
Enables/disables the settings for 002 and
003.
[0 to 1/1]
0: Disable
1: Enable
The start of summer time.
The end of summer time.
User Code Count Clear
5-16 SM