Ricoh G176 Service Manual page 156

Printer Engine Service Mode
5930 Meter Charge
Meter Charge
Switches the meter-click charge mode on and off.
[No], [Yes]
Important: Turn the main switch off/on after changing this setting.
No: Meter charge mode disabled (default). This setting is for machines were
the operator is responsible for replacing the AIO and the Maintenance Kit.
5930 001
Yes: Meter charge mode enabled. This setting is for machines where the
service technician has responsibility for servicing the machine.
M C Display
Switches the PM alerts on and off.
[No], [Yes]
No: Maintenance Kit alerts will not display.
Yes: Maintenance Kit alerts will display.
5930 002
Important:
The setting of SP5930 002 is ignored unless SP5930 001 is set to
"Yes".
In order for the PM alerts to display both SP5930 001 and SP5930 002
must be set to "Yes".
G176/G177/G176L
Alert messages are displayed on the operation panel when the AIO
or PM parts reach the limit of their yield.
The PM counter resets automatically after the user replaces the
fusing unit.
Alert messages are not displayed when the AIO or PM parts reach
the limits of their yield.
Pressing the [Menu] button displays the meter charge count.
The service technician must reset the PM counter after completing
machine maintenance.
5-54 SM