Mitsubishi melservo-j2 series Instruction Manual page 138

6. SERVO CONFIGURATION SOFTWARE
(1) Servo motor speed setting ( 1) )
Enter a new value into the "Motor speed" input field and press the return key.
(2) Acceleration/deceleration time constant setting ( 2) )
Enter a new value into the "Accel/decel time" input field and press the return key.
(3) Moving distance setting ( 3) )
Enter a new value into the "Move distance" input field and press the return key.
(4) Servo motor start ( 4), 5) )
Press the Forward button to rotate the servo motor in the forward rotation direction.
Press the Reverse button to rotate the servo motor in the reverse rotation direction.
(5) Temporary stop of servo motor ( 6) )
Press the Pause button to stop the servo motor temporarily.
Press the Forward and Reverse buttons to resume rotation.
(6) Positioning operation window closing ( 7) )
Press the Close button to cancel the positioning operation mode and close the window.
6 - 13