Mitsubishi melservo-j2 series Instruction Manual page 132

6. SERVO CONFIGURATION SOFTWARE
(3) Point table data batch-read ( 3) )
Press the Read All button to read and display all point table data from the servo amplifier.
(4) Point table data batch-write ( 4) )
Press the Write All button to write all point table data to the servo amplifier.
(5) Point table data insertion ( 5) )
Press the Insert Row button to insert one block of data into the position before the point table No.
chosen. The blocks after the chosen point table No. are shifted down one by one.
(6) Point table data deletion ( 6) )
Press the Delete Row button to delete all data in the point table No. chosen. The blocks after the
chosen point table No. are shifted up one by one.
(7) Point table data change ( 7) ,8) )
Choose the data to be changed, enter a new value into the "Setting" input field, and press the return
key or Enter Data button.
(8) Point table data file read
Used to read and display the point table data stored in the file. Use the File menu on the menu bar to
read.
(9) Point table data storage
Used to store all point table data being displayed on the window into the specified file. Use the File
menu on the menu bar to store.
(10) Point table data list print
Used to print all point table data being displayed on the window. Use the File menu on the menu bar
to print.
(11) Point table data list window closing ( 9) )
Press the Close button to close the window.
6 - 7