Mitsubishi melservo-j2 series Instruction Manual page 136

6. SERVO CONFIGURATION SOFTWARE
(1) Servo motor speed setting ( 1) )
Enter a new value into the "Motor speed" input field and press the return key.
(2) Acceleration/deceleration time constant setting ( 2) )
Enter a new value into the "Accel/decel time" input field and press the return key.
(3) Servo motor start ( 3), 4) )
Hold down the Forward button to rotate the servo motor in the forward rotation direction.
Hold down the Reverse button to rotate the servo motor in the reverse rotation direction.
(4) Servo motor stop
Release the Forward or Reverse button to stop the rotation of the servo motor.
(5) Jog operation window closing ( 5) )
Press the Close button to cancel the jog operation mode and close the window.
6 - 11