Table of Contents
Advertisement
S
, R
AFETY
EGULATIONS
Grounding and isolation
Installation safety precautions
,
This chapter describes how to prepare your site for the installation of the
EtherXtend platform. It includes the following topics:
•
Grounding and isolation, page 17
•
Installation safety precautions on page 17
•
EMI notices, page 20
•
ACTA customer information, page 20
•
Supplier's declaration of conformity, page 22
•
CE marking, page 23
•
Contacting Global Service and Support, page 23
•
Technical support, page 23
•
Service requirements, page 24
The EtherXtend uses an integrated frame and logic ground system as follows:
•
The EtherXtend device and logic ground are bonded.
•
Cable shielding is terminated on the EtherXtend system device ground.
When the AC plug is not grounded, it is recommended to ground the device
using minimum 16-gauge wire to a building or earth ground.
Avoid creating a hazardous condition by maintaining even weight distribution
within the device.
Maximum operating temperature should not exceed 65
the maximum recommended operating temperature as indicated here.
C
AND
ERTIFICATIONS
0
0
C (149
F). Observe
EtherXtend User's Guide
17
Advertisement
Table of Contents
