Configuring Bridging
Bridge profile
zSH> show bridge-interface-record
vpi:--------------------------------->
vci:--------------------------------->
vlanId:------------------------------>
stripAndInsert:---------------------->
customARP:--------------------------->
filterBroadcast:--------------------->
learnIp:----------------------------->
learnUnicast:------------------------>
maxUnicast:-------------------------->
learnMulticast:---------------------->
forwardToUnicast:-------------------->
forwardToMulticast:------------------>
forwardToDefault:-------------------->
bridgeIfCustomDHCP:------------------>
bridgeIfIngressPacketRuleGroupIndex:->
vlanIdCOS:--------------------------->
outgoingCOSOption:------------------->
outgoingCOSValue:-------------------->
s-tagTPID:--------------------------->
s-tagId:----------------------------->
s-tagStripAndInsert:----------------->
s-tagOutgoingCOSOption:-------------->
s-tagIdCOS:-------------------------->
s-tagOutgoingCOSValue:--------------->
94
EtherXtend User's Guide
The following parameters in the bridge interface record are used for Ethernet
COS support.
Parameter
vlanIdCOS
outgoingCOSOption
outgoingCOSValue
To display the bridge-record profile, enter show bridge-interface-record:
{0 - 4095}
{0 - 65535}
{0 - 2147483647}
false
false
false
false
false
{0 - 2147483647}
false
false
false
false
false
{0 - 2147483647}
{0 - 7}
disable
{0 - 7}
{33024 - 37376}
{0 - 4095}
false
s-tagdisable
{0 - 7}
{0 - 7}
Description
Specifies the value loaded into the COS field of the
VLAN header when an untagged packet received on
this interface is tagged (VLAN ID inserted) for
bridging. Value range is 0 to 7. Default is 0.
Specifies whether to insert the VLAN COS bits on
packets bridged through this interface.
Values:
Disable Leave any existing COS values unchanged.
This is the default value.
All Replace the current COS values in all VLAN
headers in tagged and untagged packets originating
and transported through this device.
For outgoing tagged packets, specifies the value used
to overwrite any existing COS value in the VLAN
header. Value range is 0 to 7. Default is 0.
true
true
true
true
true
true
true
true
true
true
all
true
s-tagall