Untagged Bridging Examples - Zhone etherxtend 3300 series User Manual

Untagged bridging examples

zSH> bridge add 1-1-40-0/efmbond
Adding bridge on 1-1-40-0/efmbond
Created bridge-interface-record 1-1-40-0-efmbond-0/bridge
zSH> get bridge-interface-record 1-1-40-0-efmbond-0/bridge
bridge-interface-record
vpi: --------------------------------->
vci: --------------------------------->
vlanId: ------------------------------>
stripAndInsert: ---------------------->
customARP: --------------------------->
filterBroadcast: --------------------->
learnIp: ----------------------------->
learnUnicast: ------------------------>
maxUnicast: -------------------------->
learnMulticast: ---------------------->
forwardToUnicast: -------------------->
forwardToMulticast: ------------------>
forwardToDefault: -------------------->
bridgeIfCustomDHCP: ------------------>
bridgeIfIngressPacketRuleGroupIndex: ->
vlanIdCOS: --------------------------->
outgoingCOSOption: ------------------->
outgoingCOSValue: -------------------->
s-tagTPID: --------------------------->
s-tagId: ----------------------------->
Configuring untagged or transparent bridging allows traffic to be forwarded
from a downlink interface through the EtherXtend uplink interface based on
the destination MAC address without tagging or modification to the frame.
Refer to the Zhone CLI Reference Guide for a complete description of the
command options and syntax.
Note: Ethernet interfaces can be addressed as either eth or
ethernetcsmacd. The eth abbreviation is used in command output.
Configuring an untagged bridge
To add an untagged bridge:
1 To add an untagged bridge to the upstream SHDSL interface, enter bridge
add interface/type:
This example adds a default transparent bridge interface to the SHDSL
card on the MALC and sets the parameters to the default transparent
bridge interface settings.
The following example shows the default bridge-interface-record
settings defaults. It is recommended not to change the default settings
unless advanced bridge configuration is required. To view the defaults,
enter get bridge-interface-record interface/type:
1-1-40-0-efmbond-0/bridge
Bridging behavior for untagged, tagged, and s-tagged
{0}
{0}
{0}
{false}
{true}
{true}
{false}
{false}
{0}
{false}
{true}
{true}
{false}
{true}
{0}
{0}
{disable}
{0}
{0x8100}
{0}
EtherXtend User's Guide
91