Zhone etherxtend 3300 series User Manual page 139

Cos Action Configuration for cosactionindex: 1:
name: ------->
traps: ------>
timeouts: --->
latency: ---->
jitter: ----->
packetsize: ->
4 Change alarm-clearing thresholds, if necessary.
The latency-clear parameter sets the criteria for when a trap (alarm) is
sent based on how often a sample is taken.
a
View the current settings with get ipsla-cos-act index number.
zSH> get ipsla-cos-act 1
ipsla-cos-act
name: ---------->
traps: --------->
timeouts: ------>
timeout-clear: ->
latency: ------->
latency-clear: ->
jitter: -------->
jitter-clear: -->
metrics: ------->
packet-size: --->
b Change the alarm-clearing threshold, in this case for latency-clear,
with update ipsla-cos-act index number.
zSH> update ipsla-cos-act 1
ipsla-cos-act
Please provide the following: [q]uit.
name: ---------->
traps: --------->
timeouts: ------>
timeout-clear: ->
latency: ------->
latency-clear: ->
jitter: -------->
jitter-clear: -->
metrics: ------->
packet-size: --->
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.
c
Verify the change by entering get ipsla-cos-act 1.
zSH> get ipsla-cos-act 1
ipsla-cos-act
name: ---------->
traps: --------->
timeouts: ------>
{Default}
{enabled}
{3}
{5000}
{10000}
{64}
1
{Default}
{enabled}
{3}
{1}
{5000}
{1}
{10000}
{1}
{enabled}
{64}
1
{Default}:
{enabled}:
{3}:
{1}:
{5000}:
{1}: 4
{10000}:
{1}:
{enabled}:
{64}:
1
{Default}
{enabled}
{3}
IPSLA
EtherXtend User's Guide
137