Table of Contents
Advertisement
fm1> get bridge-interface-record 1-1-201-0-efmbond/bridge
bridge-interface-record
vpi: --------------------------------->
vci: --------------------------------->
vlanId: ------------------------------>
stripAndInsert: ---------------------->
customARP: --------------------------->
filterBroadcast: --------------------->
learnIp: ----------------------------->
learnUnicast: ------------------------>
maxUnicast: -------------------------->
learnMulticast: ---------------------->
forwardToUnicast: -------------------->
forwardToMulticast: ------------------>
forwardToDefault: -------------------->
bridgeIfCustomDHCP: ------------------>
bridgeIfIngressPacketRuleGroupIndex: ->
vlanIdCOS: --------------------------->
outgoingCOSOption: ------------------->
outgoingCOSValue: -------------------->
s-tagTPID: --------------------------->
s-tagId: ----------------------------->
s-tagStripAndInsert: ----------------->
s-tagOutgoingCOSOption: -------------->
s-tagIdCOS: -------------------------->
s-tagOutgoingCOSValue: --------------->
mcastControlList: -------------------->
maxVideoStreams: --------------------->
isPPPoA: ----------------------------->
floodUnknown: ------------------------>
floodMulticast: ---------------------->
bridgeIfEgressPacketRuleGroupIndex: -->
bridgeIfTableBasedFilter: ------------>
bridgeIfDhcpLearn: ------------------->
Bridging behavior for untagged, tagged, and s-tagged
The global setting specifies that the EtherXtend should send all VLAN
traffic to this port. A VLAN ID can also be used when the EtherXtend
should send only traffic from a specific VLAN ID to this port. It is
recommended not to change the default settings unless advanced bridge
configuration is required.
1-1-201-0-efmbond/bridge
Note: To delete a downlink bridge with a VLAN, the VLAN ID must
be specified in the bridge delete command.
This section provides a discussion and examples of various types of bridges
and their settings:
•
Overview on page 90
•
Untagged bridging examples on page 91
Bridging behavior for untagged, tagged, and s-tagged
{0}
{0}
{0}
{true}
{false}
{false}
{false}
{true}
{100}
{false}
{true}
{false}
{false}
{false}
{0}
{0}
{disable}
{0}
{0x8100}
{0}
{true}
{s-tagdisable}
{0}
{0}
{}
{0}
{false}
{true}
{true}
{0}
{NONE(0)}
{NONE(0)}
EtherXtend User's Guide
89
Advertisement
Table of Contents
