zSH> get bridge-interface-record
bridge-interface-record
vpi: --------------------------------->
vci: --------------------------------->
vlanId: ------------------------------>
stripAndInsert: ---------------------->
customARP: --------------------------->
filterBroadcast: --------------------->
learnIp: ----------------------------->
learnUnicast: ------------------------>
maxUnicast: -------------------------->
learnMulticast: ---------------------->
forwardToUnicast: -------------------->
forwardToMulticast: ------------------>
forwardToDefault: -------------------->
bridgeIfCustomDHCP: ------------------>
bridgeIfIngressPacketRuleGroupIndex: ->
vlanIdCOS: --------------------------->
outgoingCOSOption: ------------------->
outgoingCOSValue: -------------------->
s-tagTPID: --------------------------->
s-tagId: ----------------------------->
s-tagStripAndInsert: ----------------->
s-tagOutgoingCOSOption: -------------->
s-tagIdCOS: -------------------------->
s-tagOutgoingCOSValue: --------------->
mcastControlList: -------------------->
maxVideoStreams: --------------------->
isPPPoA: ----------------------------->
floodUnknown: ------------------------>
floodMulticast: ---------------------->
bridgeIfEgressPacketRuleGroupIndex: -->
bridgeIfTableBasedFilter: ------------>
bridgeIfDhcpLearn: ------------------->
Advanced bridging configurations
To display the bridge-record profile, enter the get bridge-interface-record.
1-1-2-0-eth-100/bridge
1-1-2-0-eth-100/bridge
{0
{0}
{100}
{false}
{false}
{false}
{true}
{true}
{5}
{true}
{false}
{false}
{true}
{false}
{0}
{7}
{disable}
{0}
{0x8100}
{200}
{true}
{s-tagdisable}
{6}
{0}
{}
{0}
{false}
{false}
{false}
{0}
{NONE(0)}
{NONE(0)}
The default settings for bridge interfaces are created based on the usage of the
downlink and uplink parameters of the bridge add command. It is
recommended not to change the default settings unless advanced bridge
configuration is required. Examples of advanced bridge configurations
include:
•
Packet-rule records (Option 82, Forbid OUI, DHCP relay) on page 98
•
VLAN ID stripandInsert parameter on page 100
•
Broadcast suppression on page 101
•
Bridge with DHCP relay on page 102
Advanced bridging configurations
EtherXtend User's Guide
97