Floodmulticast Parameter - Zhone etherxtend 3300 series User Manual

FloodMulticast parameter

zSH> update bridge-interface-record 1-1-201-0-n2nbond/bridge
bridge-interface-record
Please provide the following: [q]uit.
vpi: --------------------------------->
vci: --------------------------------->
vlanId: ------------------------------>
stripAndInsert: ---------------------->
customARP: --------------------------->
filterBroadcast: --------------------->
learnIp: ----------------------------->
learnUnicast: ------------------------>
maxUnicast: -------------------------->
learnMulticast: ---------------------->
forwardToUnicast: -------------------->
forwardToMulticast: ------------------>
forwardToDefault: -------------------->
bridgeIfCustomDHCP: ------------------>
bridgeIfIngressPacketRuleGroupIndex: ->
vlanIdCOS: --------------------------->
outgoingCOSOption: ------------------->
outgoingCOSValue: -------------------->
s-tagTPID: --------------------------->
s-tagId: ----------------------------->
s-tagStripAndInsert: ----------------->
s-tagOutgoingCOSOption: -------------->
s-tagIdCOS: -------------------------->
s-tagOutgoingCOSValue: --------------->
mcastControlList: -------------------->
maxVideoStreams: --------------------->
isPPPoA: ----------------------------->
floodUnknown: ------------------------>
floodMulticast: ---------------------->
bridgeIfEgressPacketRuleGroupIndex: -->
bridgeIfTableBasedFilter: ------------>
bridgeIfDhcpLearn: ------------------->
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record created.
The FloodMulticast parameter allows the EtherXtend to flood all multicast
traffic received on a bridge out to all other ports in the VLAN. This is useful
for architectures where the EtherXtend is acting as an aggregation point with
no user interfaces. By default, this parameter is set to false for all bridge types.
When set to true, this parameter causes all multicast frames to be forwarded
out all of the bridge interfaces within the VLAN, except the interface where
the multicast was received.
To change a parameter, enter update bridge-interface-record interface/type:
1-1-201-0-n2nbond/bridge
Bridge enhancements to flood unknowns and multicasts
{0}:
{0}:
{0}:
{true}:
{false}:
{false}:
{false}:
{true}:
{100}:
{false}:
{true}:
{false}:
{false}:
{false}:
{0}:
{0}:
{disable}:
{0}:
{0x8100}:
{0}:
{true}:
{s-tagdisable}:
{0}:
{0}:
{}:
{0}:
{false}:
{true}:
{false}:true
{0}:
{NONE(0)}:
{NONE(0)}:
EtherXtend User's Guide
85