Table of Contents
Advertisement
Safety, Regulations, and CertificationsSafety, Regulations, and Certifications
EMI notices
Canada - EMI notice
ACTA customer information
20
EtherXtend User's Guide
In addition, since the equipment is to be used with telecommunications
circuits, take the following precautions:
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
•
Never touch uninsulated telephone wires or terminals unless the
telephone line has been disconnected at the network interface.
•
Use caution when installing or modifying telephone lines.
•
Avoid using a telephone (other than a cordless type) during an electrical
storm. There may be a remote risk of electric shock from lightning.
•
Do not use the telephone to report a gas leak in the vicinity of the leak.
The following are EMI notices for the United States.
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
The authority to operate this equipment is conditioned by the requirements
that no modifications will be made to the equipment unless the changes or
modifications are expressly approved by Zhone Technologies, Inc.
If the equipment includes a ferrite choke or chokes, they must be installed as
described in the installation instructions.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of the network extender is a label that
contains, among other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
Advertisement
Table of Contents
