Verifying The Interface - Zhone etherxtend 3300 series User Manual

admin-up-line-alarm: ----->
....................
Save changes? [s]ave, [c]hange or [q]uit: s
Record updated.

Verifying the interface

Entering showlinestatus displays the status of the interfaces in the system.
The following example displays some of the information returned by this
command.
zSH> showlinestatus
--------- N2NBOND RP ---------
.........................
Type ---------------> N2NBOND (22)
Registered lines ---> 1
.................
Line Type-------> N2NBOND (22)
GroupId --------> 22
Redundancy -----> NONE (0)
TxClk ----------> NONE (1)
RefClkSrc ------> NO
If_index -------> 21
Shelf ----------> 1
Slot -----------> 1
Port -----------> 201
SubPort --------> 0
--------- EFMBOND RP ---------
.........................
Type ---------------> EFMBOND (23)
Registered lines ---> 0
--------- SHDSL RP ---------
.........................
Type ---------------> SHDSL (18)
Registered lines ---> 4
Line Type-------> SHDSL (18)
GroupId --------> 10
Status ---------> ACTIVE (1)
Redundancy -----> NONE (0)
TxClk ----------> NONE (1)
RefClkSrc ------> NO
If_index -------> 9
Shelf ----------> 1
Slot -----------> 1
Port -----------> 1
SubPort --------> 0
Status ---------> ACTIVE (1)
To display the status of the interface, enter dslstat interface/type:
zSH> dslstat 1-1-4-0/shdsl
General Stats:
-------------
AdminStatus..................................UP
WAN SHDSL interfaces
{disabled}:
EtherXtend User's Guide
73