Zhone etherxtend 3300 series User Manual page 140

IP Service Level Agreement
138
EtherXtend User's Guide
timeout-clear: ->
latency: ------->
latency-clear: ->
jitter: -------->
jitter-clear: -->
metrics: ------->
packet-size: --->
5 Configure the desired COS maps to modify the default DSCP to COS
Action Index mappings. By default, DSCP are mapped to COS Action
Index entries based of RFC 2599. The following tables shows the default
mappings. A COS Action Index of 0 indicates that the DSCP is not used.
DSCP
1
11, 13, 15
19, 21, 23,
27, 29, 31
35, 37, 39
41
47
49, 57
2, 3, 4, 5, 6, 7, 8, 9, 10, 12, 14, 16, 17, 18, 20, 22, 24,
25, 26, 28, 30, 32, 33, 34, 36, 38, 40, 42, 43, 44, 45, 46,
48, 50, 51, 52, 53, 54, 55, 56, 58, 59, 60, 61, 62, 63, 64
Display the CoS map for an individual CoS action or for all CoS actions.
zSH> ipsla show cos-map
dscpIndex: 1
dscpIndex: 2
dscpIndex: 3
dscpIndex: 4
dscpIndex: 5
dscpIndex: 6
dscpIndex: 7
dscpIndex: 8
dscpIndex: 9
dscpIndex: 10
dscpIndex: 11
dscpIndex: 12
dscpIndex: 13
dscpIndex: 14
dscpIndex: 15
dscpIndex: 16
dscpIndex: 17
{1}
{5000}
{4}
{10000}
{1}
{enabled}
{64}
cosActionIndex: 1
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 0
cosActionIndex: 2
cosActionIndex: 0
cosActionIndex: 2
cosActionIndex: 0
cosActionIndex: 2
cosActionIndex: 0
cosActionIndex: 0
COS Action Index
8
7
6
5
4
3
2
1
0