Verifying The Type Of Dsl Interface; Configuring Efm-Port Settings - Zhone etherxtend 3300 series User Manual

EtherXtend SHDSL WAN Interfaces

Configuring efm-port settings

74
EtherXtend User's Guide
DslUpLineRate (bitsPerSec)...................0
DslDownLineRate (bitsPerSec).................0
DslMaxAttainableUpLineRate (bitsPerSec)......5696000
DslMaxAttainableDownLineRate (bitsPerSec)....5696000
Out Octets...................................0
Out Pkts/Cells...............................0
Out Discards.................................0
Out Errors...................................0
In Octets....................................0
In Pkts/Cells................................0
In Discards..................................0
In Errors....................................0
DSL Physical Stats:
------------------
DslLineSnrMgn (tenths dB)....................0
DslLineAtn (tenths dB).......................0
DslCurrOutputPwr (tenths dB).................0
LOFS.........................................0
LOLS.........................................0
LOSS.........................................0
ESS..........................................352902
CRC Errors...................................0
Inits........................................0

Verifying the type of DSL interface

The system creates dsl-config profiles for SHDSL cards with the appropriate
settings. To view the dsl-config profiles, enter get dsl-config interface/type:
zSH> get dsl-config 1-1-4-0/shdsl
dsl-config 1-1-4-0/shdsl
line-type: --------------->
unit-mode: --------------->
line-status-trap-enable: ->
admin-up-line-alarm: ----->
The efm-port profile provides settings for EFM port, such as admin state, snr
mode, and others. To view EFM ports, enter list efm-port:
zSH> list efm-port
efm-port 1-1-1-0/shdsl
efm-port 1-1-2-0/shdsl
efm-port 1-1-3-0/shdsl
efm-port 1-1-4-0/shdsl
efm-port 1-1-5-0/shdsl
efm-port 1-1-6-0/shdsl
efm-port 1-1-7-0/shdsl
efm-port 1-1-8-0/shdsl
8 entries found.
{shdsl-2btl}
{cpe}
{disabled}
{disabled}