Zhone etherxtend 3300 series User Manual page 141

Hide thumbs Also See for etherxtend 3300 series:
Table of Contents

Advertisement

zSH> ipsla stats path ipaddress 192.168.254.15
---------------+--------+--------+-+---------------+-+--------+-+--------+
|
Target IP
| Target | Target |C|
Address
|
name
---------------+--------+--------+-+---------------+-+--------+-+--------+
192.168.254.15| Unknown| Unknown|Y|192.168.254.166|S|
zSH> ipsla stats path
---------------+--------+--------+-+---------------+-+--------+-+--------+
|
Target IP
| Target | Target |C|
Address
|
name
---------------+--------+--------+-+---------------+-+--------+-+--------+
dscpIndex: 18
dscpIndex: 19
Type A<CR> to print all, <CR> to continue, Q<CR> to
stop:
Specify the desired index values in the command line to change the
mapping of the DSCP index to COS action index. This example changes
the mapping of DSCP index 1 to CoS action index 7. Because the DSCP
indexes (1-64) map respectively to the DSCP values (0-63), and the CoS
action index (1-8) map respectively to the CoS queues (0-7), so this
change also changes the mapping of DSCP value 0 to CoS queue 6.
zSH> ipsla modify cos-map dscpindex 1 cosactionindex 7
To clear a CoS map, specify the desired index values in the IPSLA
command to delete the mapping of the DSCP index for the COS queue.
This example clears the mapping of DSCP index 1 and resets it to the
COS queue 0.
zSH> ipsla modify cos-map dscpindex 1 cosactionindex 0
6
Display real-time statistics for path or COS queue. Real-time statistics
represent minimum, maximum, average, and current values over the
current 15 minute polling period based on data collected for each polling
intervals. For example, if the polling interval is configured for 60
seconds, the real-time statistics display the data compiled from the latest
15 60-second polling intervals contained in the current polling period.
Note: RTT values of 0 (zero) indicate a lack of data, while
sub-millisecond RTTs are reported as 1.
These statistics can be displayed individually or collectively for a
specified IP address or for all configured paths.
Note: When a card swact occurs, historical data does not failover
and data for the15-minute interval during which the swact
occurred may be lost.
|
|A|
|
type
|T|
|
|A|
|
type
|T|
cosActionIndex: 0
cosActionIndex: 3
|C|
Source
|N| UpTime |/|
IP
|X| (secs) |R|mismatch|
4357|I|
|C|
Source
|N| UpTime |/|
IP
|X| (secs) |R|mismatch|
|I|
#
|
CoS
|
0|
|I|
#
|
CoS
|
EtherXtend User's Guide
IPSLA
139

Advertisement

Table of Contents
loading

Table of Contents