IP Service Level Agreement
EtherXtend as IPSLA
Responder
Table 22: IPSLA global
Parameter
state
pollseconds
132
EtherXtend User's Guide
Figure 19: IPSLA
MALC as IPSLA
Initiator
IPSLA Path for
ICMP Pings
Configuring IPSLA
IPSLA requires the following configuration steps:
•
Set ipsla-global settings to enable device state and optionally set polling
interval
•
Create ICMP path between devices
•
Optionally modify COS actions for the desired COS queues
•
Optionally modify COS map for Diff Server Control Point (DSCP)
mappings
To configure IPSLA:
IPSLA global parameters shown in
and if globally enabled, determine the time interval between outgoing IPSLA
Pings.
Value
enabled/disables
60...3600
1
Enable IPSLA and set IPSLA ping interval.
a
View the global IPSLA settings by entering ipsla show global.
zSH> ipsla show global
state: ------->
pollSeconds: ->
The polling interval (60 to 3600 seconds) is used for real-time and
historical statistics.
IP Network
IPSLA Path for ICMP Pings
Table 22
Description
IPSLA global feature activity
The interval between outgoing IPSLA pings in seconds.
{disabled}
{60}
MALC as IPSLA
Responder
IPSLA Path for
ICMP Pings
EtherXtend as IPSLA
Responder
determine if the feature is active,