Zhone etherxtend 3300 series User Manual page 94

Configuring Bridging
s-tagStripAndInsert: ----------------->
s-tagOutgoingCOSOption: -------------->
s-tagIdCOS: -------------------------->
s-tagOutgoingCOSValue: --------------->
mcastControlList: -------------------->
maxVideoStreams: --------------------->
isPPPoA: ----------------------------->
floodUnknown: ------------------------>
floodMulticast: ---------------------->
bridgeIfEgressPacketRuleGroupIndex: -->
bridgeIfTableBasedFilter: ------------>
bridgeIfDhcpLearn: ------------------->
zSH> get bridge-interface-record 1-1-3-0-eth/bridge
bridge-interface-record
vpi: --------------------------------->
vci: --------------------------------->
vlanId: ------------------------------>
stripAndInsert: ---------------------->
customARP: --------------------------->
filterBroadcast: --------------------->
learnIp: ----------------------------->
learnUnicast: ------------------------>
maxUnicast: -------------------------->
learnMulticast: ---------------------->
forwardToUnicast: -------------------->
forwardToMulticast: ------------------>
forwardToDefault: -------------------->
bridgeIfCustomDHCP: ------------------>
bridgeIfIngressPacketRuleGroupIndex: ->
vlanIdCOS: --------------------------->
outgoingCOSOption: ------------------->
outgoingCOSValue: -------------------->
s-tagTPID: --------------------------->
s-tagId: ----------------------------->
s-tagStripAndInsert: ----------------->
s-tagOutgoingCOSOption: -------------->
s-tagIdCOS: -------------------------->
s-tagOutgoingCOSValue: --------------->
mcastControlList: -------------------->
92
EtherXtend User's Guide
2
To add a transparent bridge that accepts transparent/untagged traffic on
the EtherXtend units's downstream Ethernet port, enter bridge add
interface/type:
zSH> bridge add 1-1-3-0/eth
Adding bridge on 1-1-3-0/eth
Created bridge-interface-record 1-1-3-0-eth/bridge
3
To show the default transparent bridge-interface-record settings for the
uplink, enter get bridge-interface-record interface/type. Unless
advanced bridge configuration is required, it is recommended not to
change the default settings.
1-1-3-0-eth/bridge
{true}
{s-tagdisable}
{0}
{0}
{
{0}
{false}
{false}
{false}
{0}
{NONE(0)}
{NONE(0)}
{0}
{0}
{0}
{true}
{false}
{false}
{false}
{true}
{5}
{false}
{true}
{false}
{false}
{false}
{0}
{0}
{disable}
{0}
{0x8100}
{0}
{true}
{s-tagdisable}
{0}
{0}
{}