Zhone etherxtend 3300 series User Manual page 50

Basic Configuration
48
EtherXtend User's Guide
Managing EtherXtend using a non-default management
interface
To manage the EtherXtend through an interface different than the default
AutoConfig address, delete the default AutoConfigIP address and then add
the desired interface. If the new IP address is not compatible with the address
of the management PC, the connection to the device will be lost. To restore
the connection, change the address of the management PC to be compatible
with the device address.
The following example configures the IP address for the system:
1 Delete the AutoConfig address.
zSH> delete ip-interface-record AutoConfig/ip
2 Add the desired interface to a bond port group.
zSH> interface add 1-1-4-0/n2nbond 172.24.200.133/24
Created ip-interface-record ethernet1/ip
Note: The default interface is reset if a set2default is performed
without the restore option.
Verifying the interface
Enter interface show to verify that the Ethernet interface was configured
correctly on the EtherXtend: