Table of Contents
Advertisement
6
Local DTE Address
Packet Size
Window Size
Network User ID
Request Reverse Charge
Closed User Group
RPOA List
6-10
The X.25 PSDN address of the local system. The address is a decimal number
(up to 15 digits). The default is the address configured in the X.25 software.
This parameter applies to switched VC connections only.
The packet size requested for the switched VC. The value can range from 16 to
4096.
Refer to the Solstice X.25 System Administrator's Guide for information on setting
up other related parameters before you can establish a QLLC connection. (For
example, you must set Size Negotiation to Request Size Negotiation in the
Closed User Groups and Facilities Parameters for Link dialog box. You must
also specify the X.121 address, the serial port, and SVCs.)
The window size requested for the switched VC. The value can range from 1 to
7 or from 1 to 127, depending on the HDLC modulus. The window size should
equal the default X25LINE WINDOW_SIZE parameter. If not, to allow flow
control negotiation, make sure that the X25LINE L3FLOW_CTL_NEG
parameter is set to ACCEPT.
The ASCII-coded network user ID in a call request. The ID can be any
alphanumeric string.
Indicates whether to request reverse charging in call requests. Check the box if
you want to request reverse charging. Clear the box if you do not want to
request reverse charging.
An index (CUG) to include in call requests. The CUG index is a decimal
number (two or four digits). Do not specify a CUG with outgoing access or a
bilateral CUG.
A list of Recognized Private Operating Authority (RPOA) codes. These codes
map to the X.25 call request RPOA selection facility and represent the Data
Network Identification Code (DNIC) addresses of the preferred RPOAs. You
enter a string of up to 24 characters (up to 6 non-separated, 4-digit RPOA
codes).
SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997
Advertisement
Table of Contents
