Replacing The Processor Extender Board; Figure 7-12 Processor Extender Board - HP Integrity rx4640 Operation And Maintenance Manual

Step 5. Pull out on the extraction levers to unplug the processor extender board from the socket located on the midplane
riser board.
Figure 7-12 Processor Extender Board

Replacing the Processor Extender Board

To replace the processor extender board, perform the following steps:
Step 1. Ensure the extraction levers are positioned in the outward, unlocked position.
Step 2. Align the processor extender board with the front and rear card guides.
Step 3. Slide the processor extender board down until it begins to seat in the socket located on the midplane riser board.
Step 4. Push the extraction levers inward to the locked position in order to fully seat the processor extender board into the
socket on the midplane riser board.
Step 5. Replace the front cover.
Step 6. Replace the front bezel.
Step 7. If rack mounted, slide the HP Server into the rack until it stops.
Chapter 7
Removing and Replacing Components
Processor Extender Board
161